Nitto Kohki Group Networks

Portable Automatic Drilling Machine (WA-5000)



Product Description

Advanced Technology / Reducing Hole Drilling Cost.

Power Source (Single Phase) 110-120 V AC 50/60Hz
Electric Rated Power Consumption 1,150 W
Drill Rated Current 10.8 A
No Load Speed 350 / 650 rpm
Magnet Power Consumption 75 W
Capacity Hole Diameter 2" max.
Depth of Cut 3" max.
Magnet Holding Power 2,200 lbs.
Magnet Dimensions 4" x 8" inch
Weight 51 lbs.
Accessories Included
  • UEA0850-0 pilot pin 5/16" x 2" DOC
  • 3 mm allen wrench
  • 4 mm allen wrench
  • 8 mm x 10 mm combination spanner
  • Chip guard assembly
  • Motor side handle
  • Sample cutting fluid
  • Safety chain
  • Molded plastic carrying case

Product Characteristics

Load Sensor The dual sensing system responds to both drilling and feeding forces on the cutter for the optimum cutting condition.
Variable Automatic Feed The feed speed is continuously monitored and updated proportionally to the load on the cutter.
Cycle Stop After the cut has finished, a detector responds to the reduction in load and both the drill and the feed motor automatically stop.