The customers of our Power Tools business field mainly come from the metalworking industry, e.g. from container construction, plumbers, air conditioning industry, demolition, car- and railway construction as well as from manufacturers of electronics/switching cabinets. We offer electric power-, cordless and pneumatic tools for sheet meatl processing for
Cutting
Fastening
Bevelling
Slat cleaning

TruTool C 250 with integrated chip breaker for operation with one hand has a particularly important and unique advantage. The chip can conveniently be removed from any point with one hand. The tool can be easily pulled out and accurately replaced in the workpiece, thanks to visible position markings on the cutter head. By selecting TruTool C 250 you have chosen the most powerful and fastest slitting shear in its class. It delivers the power to cut sheet up to 2.5 mm thickness. The spiral unrolling of the chip protects the surface of the sheet.

Power-Head-Technology: TruTool S 160 is now also available as Li-Ion battery. Many details in the gear head are tailored to the voltage of the battery technology and enable the 10,8 volt battery to produce output that is comparable to a 14.4 volt battery.

Become acquainted with the unique height adjustment of this shear.

Power-Head-Technology: The shear is now also available as Li-Ion battery. Many details in the gear head are tailored to the voltage of the battery technology and enable the 10,8 volt battery to produce output that is comparable to a 14,4 volt battery. If you wish to cut ventilation pipes off flush with walls or ceilings, TruTool S 114 is the right choice for you. Our trimming shear has a minimal collision contour of 30 mm. This permits trouble-free and precise trimming of pipes located relatively close to wall or ceiling. You can cut spiral ducts with it too.

TruTool N 200 is well suited to cut flat and corrugated sheet metal. With its hollow round punch, The TruTool N 200 is so maneuverable it can rotate on the spot.

Our TruTool N 500 is intended for dismantling tanks and containers. It also cuts workpieces with bends of up to 90�, and doubled sheets. With the TruTool N 500 you can cut in all four cutting directions; that is, including backwards. This means improved handling, and makes the tool unique in the performance class for steel sheets up to 5 mm. Moreover, you can pull the tool toward yourself in the horizontal plane, which is ideal for cutting coils. Or you can guide the nibbler vertically from top to bottom with very little force.

The TruTool N 1000 was designed especially for use with thick sheets. It is used primarily for dismantling tanks and containers. It handles cuts over edges, weld seams and doubled sheets like no other. With the two-speed drive, you can work with a maximal sheet thickness of 10 mm at low speed. In second gear, the nibbler works through the sheet faster and can handle a material thickness of 8 mm.

TruTool PN 201 is a profile nibbler with long tool which is well-suited for cuts in trapezoidal sheets up to 162 mm depth. Maneuverability is made easy as the power tool can even be roated 360�.

The new Panel Cutter TruTool 165 separates polyurethane and polyisocyanurate sandwich panels regardless of whether the panel surface is flat, trapezoidal or corrugated. the machine can handle diverse applications, ranging from crosscuts and right-angle cuts to interior cutouts and notches. Even cutouts on pre-mounted panels are easy work for the new panel cutter.

With its powerful 1400 W motor and high operating speed, this seam closer is an even stronger version of the TruTool F 300. Whether for straight or curved conduits, Pittsburgh seams are always closed in an independent roll/glide process. The sheet thickness ranges from 0.75 mm to 1.25 mm construction steel and the integrated infeed ensures continuous and tight seaming. There is no need for conversion for processing of shaped and curved pieces. Adaptation to sheet thickness is automatic. On-site assembly is also possible.

You often want to close short rims from 5 mm. And this has to be done in a sheet thickness range from 0.45 to 0.75 mm. But converting the seam preparation machine is too time-consuming. With the TruTool F 305 we have developed a seam closer that is exactly what's needed. You can use it to process straight ducts and achieve very compact and correct right-angle seams.

There is a frequent need to process small curves for ventilator housings. The sheet thickness ranges from 0.75 to 1.4 mm construction steel. With TruTool F 140 for ventilator housings you can do this easily since it makes best quality closures with curve radii from 100 mm. The surface structure is not damaged.

With the power fastener you can join coated or uncoated workpieces. There is no limit to the variety of materials. There is no need for pre- or post-processing.

The TruTool TKF 700 can be used wherever you make K-, V-, X- and Y-shaped bevel preparations. And this not only on level sheets but also pipes. Bevel size and sheet thickness are set without tools and very simply. The tool carrier is turned in one of three defined processing directions. TruTool TKF 700 is our lightest beveler. You can use it manually in vertical, horizontal or overhead position or in a work station.

In contrast to TruTool TKF 1100, the TruTool TKF 1101 beveler is used for construction steel and aluminum. Its transmission works faster. This results in an increase of stroke rate with which you can achieve the desired high bevel quality in construction steel and aluminum. The edges are always free of oxide and emissions. There is no need at all for post-processing. Weld joints can be made both on straight sheets and on tubes, interior cutouts and curved edges.

With the TruTool TKF 1500 weld beveler with 2-speed transmission you can work individually with the material to be processed. If you are working with high-tensile material, a reduction of stroke rate is recommended. This will give you a high-quality bevel and increase the service life of the pusher. Here too, the bevel angles can be progressively adjusted in a range from 20� to 55�. Whether you are producing K, V, X or Y angles or whether you are working on straight sheets or T carriers, the result is always even and free of oxide, and the surface only exhibits a slight degree of roughness. TruTool TKF 1500 with 2-speed transmission is suited to both mobile and stationary weld seam preparation. Minimal mounting with quick release tools and long service life ensure efficiency.

The beveller TruTool TKF 1500 with automatic forward feed and two speed plays his strengths particularly in the processing of straight edges on long sheet metal plates. The new beveller allows you to work without the use of muscle power as the machine must only be put into the sheet metal plate. After this the machine runs alone and it is sufficient when you keep an eye on the beveller. This will save you as a user much energy and you can easily prepare welding edges with a working speed of 2 m/min.

TruTool TKF 2000 beveller is the first beveller that can produce bevelled lengths up to 20 mm in stainless steel and aluminum in one work step. The innovative specialized tool is especially notable for its high surface quality, productivity and zero emissions. The new tool is modular in design and can be equipped with or without an automatic forward feed. TruTool TKF 2000 with forward feed is recommended if long and straight metal sheets have to be beveled. Placed on the sheet, the machine with automatic forward feed operates on its own and requires no manual feed.

Thanks to a new process, the TruTool TSC 100 slat cleaner removes accumulated slag very thoroughly. The slats are even cleaned on the sides as well as in the hart-to-reach spaces in between, thus resulting in outstanding cleanliness.